Ryan Holmquist

  • Total activity 78
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 0 users
  • Votes 0
  • Subscriptions 40

Activity overview

Latest activity by Ryan Holmquist
  • Ryan Holmquist commented,

    Official comment

    6.5 Creedmoor is very similar in size and shape to a 308 so they will feed from our polymer 308 mags, or if you need longer loading lengths, the metal mags will allow you to reload longer.

  • Ryan Holmquist commented,

    Official comment

    Yes!  The 12FV will drop right into the Savage SA chassis and convert over to use AICS pattern magazines.

  • Ryan Holmquist commented,

    Official comment

    Yes, the 6.5PRC is a short action and should work in the Howa, you will need metal, non binder mags and since the Howa has a flat bottom, you will have to modify the front of the metal mags to matc...

  • Ryan Holmquist commented,

    Official comment

    There is a hole on either side of the buttstock that is milled to accept a QD Sling.

  • Ryan Holmquist commented,

    Hello Peter, The link to your bipod did not work through here, you can use our support link on the bottom right of each page and our support agents can confirm 100%. The 300WM should feed without a...

  • Ryan Holmquist commented,

    Official comment

    Hello Peter, to answer your questions, you will need the Savage LA chassis and it will convert it over to accept 3.715" AICS magazines.  The chassis has a QD sling cup on the rear of the chassis, t...

  • Ryan Holmquist commented,

    Official comment

    You will need the MDT 3.560" magazine and the 6.5x55 will feed from the 30-06 feedlip configurations - https://mdttac.com/us_en/mdt-metal-magazines-long-action.html

  • Ryan Holmquist commented,

    Official comment

    You can free-float up to a 1.15" diameter barrel through the length of the forend without an issue.

  • Ryan Holmquist commented,

    Official comment

    Yes, no issues there, clearing a barrel up to 1.15" is no issues in our chassis so any factory heavy barrel is no issues what so ever.   They would be two different chassis, your 700 would drop int...

  • Ryan Holmquist commented,

    Official comment

    Yes, no issues there, clearing a barrel up to 1.15" is no issues in our chassis so any factory heavy barrel is no issues what so ever.   They would be two different chassis, your 700 would drop int...